Understand the two different quantities
Watts describe a rate of electrical power use. Kilowatt-hours describe energy over time. A 1,000-watt appliance operating at that power for one hour uses one kilowatt-hour. Divide watts by 1,000 to express kilowatts, then multiply by operating hours for a basic energy estimate.
The calculation is straightforward, but the input matters. Some appliances cycle, vary power or heat only during part of a programme. A maximum rating on a nameplate is not automatically the average input throughout the day.
Make a labelled example
Suppose a fictional 100-watt device operates steadily for five hours each day. Its daily energy estimate is 0.1 kilowatts multiplied by five hours, or 0.5 kilowatt-hours. Over 30 days that is 15 kilowatt-hours. At an assumed energy price of two units per kilowatt-hour, the illustrative energy charge is 30 units.
These are invented teaching values. Use the tariff and charging structure applicable to your account for a real budget, including any relevant fixed charges, tiers or other conditions. Do not publish a guessed Zimbabwe tariff as a guaranteed running cost.
Use appropriate comparison data
For a refrigerator, look for annual energy information produced under a stated test method and compare similar sizes and configurations. For a washing machine, a programme-specific or label figure can be more useful than multiplying the maximum heater rating by the whole cycle time. Check what the number includes.
A competent person may use suitable measurement equipment where safe and appropriate. Do not expose wiring, modify plugs or bypass protective devices to measure consumption. Supply quality and operating conditions can affect equipment performance.
Turn the estimate into a decision
Compare use patterns as well as equipment. A larger machine run nearly empty or an oversized refrigerator may not suit the household. Keep a short record of actual use and investigate a surprising change before replacing an appliance. An unexpected bill can have several causes.
Write your assumptions beside every estimate: duration, duty cycle if known, programme, capacity and energy price. A useful calculation is one another person can reproduce and challenge. Treat savings claims without a defined baseline, test conditions or evidence as a question to investigate.
- Power in watts divided by 1,000 gives kilowatts.
- Kilowatts multiplied by hours gives kilowatt-hours.
- Energy multiplied by an applicable unit charge gives an estimated energy cost.
- Compare the same task and state all assumptions.
Audit an energy claim
Take one advertised saving and ask what equipment, use pattern and energy price form its baseline. Write those assumptions beside the claim. If the seller cannot provide them, mark the saving unverified rather than entering it as guaranteed income in a household budget. Recalculate one simple steady-load example yourself and check the units at each step. For cycling appliances, use suitable published consumption data or competent measurement rather than inventing a duty cycle. Keep purchase cost and operating cost in separate rows so that a low monthly estimate does not hide a large installation expense. This is a comparison exercise, not an electrical design.
Sources & further reading
Use these references to check the underlying guidance and any current local requirements. Practical worksheets and illustrative examples in this guide are original educational material.
- ZERA: energy saving tips
- US Department of Energy: energy-efficient residential refrigerators
- ENERGY STAR: clothes washers and buying guidance
This guide is general information. Source notes are not a claim of independent professional review.